Uma unidade da AKRIBIS One

Ultisil_Hilic_Silica-Series

Ultisil Hilic Silica

Ultisil Hilic Silica features a specially treated silica matrix to enhance lifespan and stability when separating strongly polar compounds in high aqueous phases. It operates under multiple retention mechanisms in HILIC mode, offering complementary selectivity to reversed-phase chromatography for unique separation results. The column is optimized for high-volatility mobile phases (>80% organic solvent), making it ideal for mass spectrometry (MS) detection and sensitivity analysis.

Solicitar cotaçãoBaixar ficha técnica

Ultisil Hilic Silica

Description

Ultisil Series HPLC Columns are based on ultra-pure (purity > 99.999%) spherical and totally porous silica, unique bonding chemistry and proprietary surface modification techniques, producing excellent peak shape, column efficiency and exceptional lot-to-lot reproducibility. Ultisil column is the best choice for method development. owing to complete bonding chemistries and stable performance

Features

  • Ultra-pure spherical porous silica, purity > 99.999%
  • Wide pH range: 2.0-8.0
  • High efficiency: theoretical plate > 80000/m
  • Excellent peak symmetry: tailing factor=0.95~1.05
  • Exceptional lot-to-lot reproducibility

Trace Amount Metal Contents Test

A useful chromatographic test of trace amount of metal contents in the column is to compare the peak symmetry of one pair of positional isomers, 4,4’-dipyridyl and 2,2’-dipyridyl, and a neutral chelating reagent, 1,2-dihydroxylnaphthalene. 4,4’-dipyridyl, which cannot form chelating complex with metal, is used as a reference. 2,2’-dipyridyl and 1,2-dihydroxylnaphthalene, which are chelating reagents, are sensitive to trace amount metal in silica. When a C18 column based on type A silica or other so-called type B silica with higher metal content is used, the peaks of 2,2’-dipyridyl and 1,2-dihydroxylnaphthalene would tail or even totally disappear.

ColumnUltisil® XB-C18, 4.6 ×150 mm, 5 μm
Mobile Phase20 mM phosphate(pH 7.6) / methanol=55/45
Flow Rate1.0 mL/min
Detector215 nm
Temperature25°C
Injection Volume1 μL
Samples1) 4,4’-Dipyridyl; 2) 2,2’-Dipyridyl; 3) 1,2-Dihydroxylnaphthalene

Conclusion: Ultisi XB-C18 provides good peak shapes in the separation of these three compounds under pH 7.6, which indicates Ultisil silica contains hardly any metals.

Specifications

Pore size120 Å
Particle size3 µm, 5 µm
ID2.1 mm, 4.6 mm
Length50 mm, 100 mm, 150 mm, 200 mm, 250 mm, 300 mm
PhaseHILIC Silica
USP ClassificationL3
Separation ModeHILIC Mode
pH Range2.0-8.0
Surface Area320m2/g
Max. Pressure60 MPa
Max. Temp.60°C(pH≤6.5) and 40°C(pH>6.5)
Particle ShapeSpherical
Similar ColumnsAgilent ZORBAX HILIC Plus; Thermo Acclaim HILIC-10; Waters XBridge Hilic; Waters Atlantis HILIC; Sepax HILIC Polar-silica

Configurar o equipamento

Escolha modelo, sondas e acessórios. As combinações incompatíveis são bloqueadas na hora; as demais regras são verificadas ao adicionar o equipamento à cotação.

Documentos

Escrever pelo WhatsApp