Uma unidade da AKRIBIS One

Ultisil_SiO2-Series

Ultisil SiO2

Ultisil SiO2 column utilizes B-type ultrapure fully porous spherical silica gel (purity >99.999%) as the packing material, featuring low acidity and low metal content. It is suitable for the separation of highly polar and lipophilic compounds.

Solicitar cotaçãoBaixar ficha técnica

Ultisil SiO2

Description

Ultisil Series HPLC Columns are based on ultra-pure (purity > 99.999%) spherical and totally porous silica, unique bonding chemistry and proprietary surface modification techniques, producing excellent peak shape, column efficiency and exceptional lot-to-lot reproducibility. Ultisil column is the best choice for method development. owing to complete bonding chemistries and stable performance

Features

  • Ultra-pure spherical porous silica, purity > 99.999%
  • Wide pH range: 2.0-8.0
  • High efficiency: theoretical plate > 80000/m
  • Excellent peak symmetry: tailing factor=0.95~1.05
  • Exceptional lot-to-lot reproducibility

Trace Amount Metal Contents Test

A useful chromatographic test of trace amount of metal contents in the column is to compare the peak symmetry of one pair of positional isomers, 4,4’-dipyridyl and 2,2’-dipyridyl, and a neutral chelating reagent, 1,2-dihydroxylnaphthalene. 4,4’-dipyridyl, which cannot form chelating complex with metal, is used as a reference. 2,2’-dipyridyl and 1,2-dihydroxylnaphthalene, which are chelating reagents, are sensitive to trace amount metal in silica. When a C18 column based on type A silica or other so-called type B silica with higher metal content is used, the peaks of 2,2’-dipyridyl and 1,2-dihydroxylnaphthalene would tail or even totally disappear.

ColumnUltisil® XB-C18, 4.6 ×150 mm, 5 μm
Mobile Phase20 mM phosphate(pH 7.6) / methanol=55/45
Flow Rate1.0 mL/min
Detector215 nm
Temperature25°C
Injection Volume1 μL
Samples1) 4,4’-Dipyridyl; 2) 2,2’-Dipyridyl; 3) 1,2-Dihydroxylnaphthalene

Conclusion: Ultisi XB-C18 provides good peak shapes in the separation of these three compounds under pH 7.6, which indicates Ultisil silica contains hardly any metals.

Specifications

Particle size3 µm, 5 µm, 10 µm
Pore size120 Å, 300 Å
ID2.1 mm, 3 mm, 3.9 mm, 4 mm, 4.6 mm, 6 mm, 6.5 mm, 7.8 mm
Length30 mm, 33 mm, 50 mm, 75 mm, 100 mm, 125 mm, 150 mm, 200 mm, 250 mm, 300 mm
PhaseSILICA
USP ClassificationL3
Separation ModeNormal Mode
pH Range2.0-8.0
Surface Area90m2/g, 320m2/g
Max. Pressure40 MPa, 60 MPa
EndcappedNo
Max. Temp.70°C(pH≤6.5) and 40°C(pH>6.5)
Particle ShapeSpherical
Similar ColumnsAgilent ZORBAX Rx SIL; Agilent ZORBAX SIL; Agilent Pursuit XRs Si; Phenomenex Luna Silica (2); Phenomenex Prodigy Silica-3; Phenomenex Prodigy Silica; Sepax Sepax HP-Silica; Supelco SUPELCOSIL LC-Si; Thermo BETASIL Silica 100; Thermo Hypersil GOLD SILICA; Thermo Hypersil Silica; Thermo Syncronis Silica

Configurar o equipamento

Escolha modelo, sondas e acessórios. As combinações incompatíveis são bloqueadas na hora; as demais regras são verificadas ao adicionar o equipamento à cotação.

Documentos

Escrever pelo WhatsApp